EMULSIFIER HOMOGENIZER SUPPORTS FOR CONTAINERS FOR MISCEO 650 AND MISCEO 1100 - DIAM 800 mm

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

The Dissolver/Dispersion Tool with medium/high shear is used at a medium to high speed in low viscosity fluids to reduce particle size and break down agglomeration (clumping of particles forming a mass). With a radial flow (drawing from both the top and the bottom) this medium/high shear tool creates high turbulence and is ideal for particle fragmentation and dispersion. Ideal in low viscosity for dissolution of powders, homogenous pigment dispersion and use with materials that are not shear sensitive. Once particle reduction and agglomeration break down has been achieved you may choose to continue with a lower shear tool such as the Turbo Agitator Tool, the Anchor Stirrer or the Spiral Stirrer for the remainder of your product.

COMPLETE SET : Dissolver + Propeller 4 blades + Spiral + Anchor for range 300 P/F

Important notification : if you purchased a turbo agitator tool from 300 range (ref. PC038) prior to 01/05/2024, the complete set will not fit. You will need to purchase the new generation reduction box PC038.0.

PATENTED SYSTEM

Pan support brackets / fully removable

Special production, intensive use.

Stainless steel for food products for perfect hygiene.

Sturdy and convenient.

Mixing 4 blades 

160 mm : PC022

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.

PATENTED SYSTEM

This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.