VACUUM ROTOR STATOR TOOL MISCEO 250 - 190 mm

This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.

Mixing 2 blades

160 mm : PC012

190 mm : PC013

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

Mixing 3 blades

The Dissolver/Dispersion Tool with medium/high shear is used at a medium to high speed in low viscosity fluids to reduce particle size and break down agglomeration (clumping of particles forming a mass). With a radial flow (drawing from both the top and the bottom) this medium/high shear tool creates high turbulence and is ideal for particle fragmentation and dispersion. Ideal in low viscosity for dissolution of powders, homogenous pigment dispersion and use with materials that are not shear sensitive. Once particle reduction and agglomeration break down has been achieved you may choose to continue with a lower shear tool such as the Turbo Agitator Tool, the Anchor Stirrer or the Spiral Stirrer for the remainder of your product.

PATENTED SYSTEM

Up to 20L

This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.

Mixing 4 blades 

160 mm : PC022

Vacuum mixing 2 blades tool

160 mm : PC012

190 mm : PC013