MIXING 4 BLADES TOOL MISCEO 250 - 160 mm

This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.

Important notification : if you purchased a turbo agitator tool from 250 range (ref. PC018) prior to 01/05/2024, the spiral tool will not fit. You will need to purchase the new generation reduction box PC018.0.

COMPLETE SET : Dissolver + Propeller 4 blades +Spiral + Anchor for range 200 P/F

Important notification : if you purchased a turbo agitator tool from 250 range (ref. PC018) prior to 01/05/2024, the complete set will not fit. You will need to purchase the new generation reduction box PC018.0.

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

Mixing 4 blades 

160 mm : PC022

190 mm : PC023

Pan support brackets / fully removable

Special production, intensive use.

Stainless steel for food products for perfect hygiene.

Sturdy and convenient.

This motor block is intended to be associated only with the following MISCEO support : SC060, SC080 or SC090. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.

The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.

The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.

Vacuum Rotor stator tool 

160 mm: PC014

190 mm: PC015

The Spiral Stirrer is used at a low to medium speed in medium to high viscosity fluids. With an axial flow (drawing from the bottom to the top) the Spiral Stirrer is ideal for homogenous mixing and for cooldown phases with heat exchange from bottom to top. The Spiral Stirrer is very good for even distribution of particles (exfoliating beads, active particle beads) and pigments throughout a product. Can be used with sensitive materials. Suitable for emulsions, suspensions, gels, color cosmetics.

Pan support brackets / fully removable

Special production, intensive use.

Stainless steel for food products for perfect hygiene.

Sturdy and convenient.