ROTOR-STATOR TOOL MISCEO 2200

Mixing 4 blades 

160 mm : PC022

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

Vacuum mixing 2 blades tool

160 mm : PC012

190 mm : PC013

Up to 4L

The Turbo Agitator Tool is an excellent all-round tool for most general low shear stirring requirements and ideal for using with shear sensitive materials and mixing surfactants. With an axial flow (drawing from the bottom to the top) it can be used from low speed through to high speed, for low through to medium viscosity fluids. When creating surfactant type products (shampoos, body washes) it is best to commence on low speed to minimise foaming. Medium to high speed is suitable for emulsions, suspensions, oleogels, cooldown phases and other products requiring general stirring.

Low Shear

Low to High Speed

Low to Medium Viscosity

Axial Flow

Vacuum Rotor stator tool 

160 mm: PC014

190 mm: PC015

The Spiral Stirrer is used at a low to medium speed in medium to high viscosity fluids. With an axial flow (drawing from the bottom to the top) the Spiral Stirrer is ideal for homogenous mixing and for cooldown phases with heat exchange from bottom to top. The Spiral Stirrer is very good for even distribution of particles (ex exfoliating beads, active particle beads) and pigments throughout a product. Can be used with sensitive materials. Suitable for emulsions, suspensions, gels, color cosmetics.

The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.

COMPLETE SET : Dissolver + Propeller 4 blades + Spiral + Anchor for range 300 P/F

Important notification : if you purchased a turbo agitator tool from 300 range (ref. PC038) prior to 01/05/2024, the complete set will not fit. You will need to purchase the new generation reduction box PC038.0.

Mixing 4 blades 

160 mm : PC022

190 mm : PC023

Cisailleur 2 lames

160 mm : PC012

190 mm : PC013