BM MISCEO 300 F
Including €0.03 for ecotax
•Mixing
• Beating
• Proliferation
- Output
- 300 W
- Compatibility
- Misceo 300
16 other products in the same category:
TURBO AGITATOR TOOL 1/9 - 185 mm
Up to 4L
The Turbo Agitator Tool is an excellent all-round tool for most general low shear stirring requirements and ideal for using with shear sensitive materials and mixing surfactants. With an axial flow (drawing from the bottom to the top) it can be used from low speed through to high speed, for low through to medium viscosity fluids. When creating surfactant type products (shampoos, body washes) it is best to commence on low speed to minimise foaming. Medium to high speed is suitable for emulsions, suspensions, oleogels, cooldown phases and other products requiring general stirring.
Low Shear
Low to High Speed
Low to Medium Viscosity
Axial Flow
SPIRAL STIRRER TOOL 1/9 - length 225 mm
The Spiral Stirrer is used at a low to medium speed in medium to high viscosity fluids. With an axial flow (drawing from the bottom to the top) the Spiral Stirrer is ideal for homogenous mixing and for cooldown phases with heat exchange from bottom to top. The Spiral Stirrer is very good for even distribution of particles (ex exfoliating beads, active particle beads) and pigments throughout a product. Can be used with sensitive materials. Suitable for emulsions, suspensions, gels, color cosmetics.
SERVOMIX SUPPORT COMPATIBLE FOR MISCEO 650 F AND MISCEO 1100 F
This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.
TURBO AGITATOR TOOL 1/9 - length 225 mm
Up to 4L
The Turbo Agitator Tool is an excellent all-round tool for most general low shear stirring requirements and ideal for using with shear sensitive materials and mixing surfactants. With an axial flow (drawing from the bottom to the top) it can be used from low speed through to high speed, for low through to medium viscosity fluids. When creating surfactant type products (shampoos, body washes) it is best to commence on low speed to minimise foaming. Medium to high speed is suitable for emulsions, suspensions, oleogels, cooldown phases and other products requiring general stirring.
Low Shear
Low to High Speed
Low to Medium Viscosity
Axial Flow
MIXING 2 BLADES TOOL ALL STAINLESS STEEL - 190 mm
Mixing 2 blades
160 mm : PC012
190 mm : PC013
EMULSIFIER HOMOGENIZER SUPPORTS FOR CONTAINERS FOR MISCEO 650 AND MISCEO 1100 - DIAM 1000 mm
Pan support brackets / fully removable
Special production, intensive use.
Stainless steel for food products for perfect hygiene.
Sturdy and convenient.