2024 End of year information : Christmas holidays

Our team is having a festive break from December 24 th  to January 5 th.

Shipments will start again on January 8th.

MOTOR BLOCK MISCEO 1100 F

PC165.AUS
€1,928.00
Tax excluded

Including €0.31 for ecotax

This motor block is intended to be associated only with the following MISCEO support : SC060, SC080 or SC090. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.

Power plug
  • EU
  • UK
  • AUS
  • US
Quantity

•Mixing

• Beating

• Proliferation


Output
1100 W
Compatibility
Misceo 1100

16 other products in the same category:

DISSOLVER DISPERSION TOOL D60 1/9 - length 225 mm

€380.00

The Dissolver/Dispersion Tool with medium/high shear is used at a medium to high speed in low viscosity fluids to reduce particle size and break down agglomeration (clumping of particles forming a mass). With a radial flow (drawing from both the top and the bottom) this medium/high shear tool creates high turbulence and is ideal for particle fragmentation and dispersion. Ideal in low viscosity for dissolution of powders, homogenous pigment dispersion and use with materials that are not shear sensitive. Once particle reduction and agglomeration break down has been achieved you may choose to continue with a lower shear tool such as the Turbo Agitator Tool, the Anchor Stirrer or the Spiral Stirrer for the remainder of your product.

SPIRAL HEAD

€132.00

Important notification : if you purchased a turbo agitator tool from 300 range (ref. PC0038) prior to 01/05/2024, the spiral tool will not fit. You will need to purchase the new generation reduction box PC038.0.

SPIRAL STIRRER TOOL 1/9 - length 185 mm

€431.00

The Spiral Stirrer is used at a low to medium speed in medium to high viscosity fluids. With an axial flow (drawing from the bottom to the top) the Spiral Stirrer is ideal for homogenous mixing and for cooldown phases with heat exchange from bottom to top. The Spiral Stirrer is very good for even distribution of particles (exfoliating beads, active particle beads) and pigments throughout a product. Can be used with sensitive materials. Suitable for emulsions, suspensions, gels, color cosmetics.