MIXING 2 BLADES TOOL ALL STAINLESS STEEL - 190 mm

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

Mixing 4 blades 

160 mm : PC022

This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.

Up to 4L

The Turbo Agitator Tool is an excellent all-round tool for most general low shear stirring requirements and ideal for using with shear sensitive materials and mixing surfactants. With an axial flow (drawing from the bottom to the top) it can be used from low speed through to high speed, for low through to medium viscosity fluids. When creating surfactant type products (shampoos, body washes) it is best to commence on low speed to minimise foaming. Medium to high speed is suitable for emulsions, suspensions, oleogels, cooldown phases and other products requiring general stirring.

Low Shear

Low to High Speed

Low to Medium Viscosity

Axial Flow

Mixing blades

PC051 : 400 mm 

PC055 : 300 mm 

Important notification : if you purchased a turbo agitator tool from 300 range (ref. PC0038) prior to 01/05/2024, the spiral tool will not fit. You will need to purchase the new generation reduction box PC038.0.

Mixing 4 blades 

160 mm : PC022

190 mm : PC023

The Spiral Stirrer is used at a low to medium speed in medium to high viscosity fluids. With an axial flow (drawing from the bottom to the top) the Spiral Stirrer is ideal for homogenous mixing and for cooldown phases with heat exchange from bottom to top. The Spiral Stirrer is very good for even distribution of particles (exfoliating beads, active particle beads) and pigments throughout a product. Can be used with sensitive materials. Suitable for emulsions, suspensions, gels, color cosmetics.